Mail Attachment Print label
print 
 



Material Safety Data Sheet


GERMGUARD RTU
Infosafe™ No.VAR2KIssue DateFebruary 2021StatusISSUED by MILESTONBS: 1.17.117

Not classified as hazardous according to criteria of NOHSC


 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER

 
Product NameGERMGUARD RTU
 
Company NameMilestone Chemicals Pty. Ltd. (ABN 85115166357)
 
Address115 Northern Road West Heidelberg
VIC 3081
 
Emergency Tel.(03) 9450 4555 Mon-Fri 8am - 6pm
 
Telephone/Fax NumberTel: (03) 9450 4555
Fax: (03) 9457 5518
 
Recommended UseA Ready-to-Use, No-Rinse Surface sanitiser for use in food preparation areas.
 
Other NamesNone Listed
 

 2. HAZARDS IDENTIFICATION

 
Hazard ClassificationNot classified as Hazardous
Not classified as a Dangerous Good
 

 3. COMPOSITION/INFORMATION ON INGREDIENTS

 
Chemical CharacterizationLiquid
 
Ingredients    Name CAS Proportion Hazard Statement(s)
   
   Dialkyl Dimethylammonium Chloride68424-95-3<1%
   Ingredients determined not to be hazardous, including water.to 100%
 

 4. FIRST AID MEASURES

 
First Aid MeasuresM
 
InhalationMove victim to fresh air.
 
IngestionRinse mouth with water. Do not induce vomiting. Give a glass of water to be taken slowly. If unwell, contact a doctor or Poisons Information Centre immediately.
 
SkinIf skin contact occurs, remove contaminated clothing and wash skin thoroughly.
 
EyeIf in eyes, hold eyes open, flood with water for at least 15 minutes and see a doctor.
 
First Aid FacilitiesEye wash station and normal washroom facilities.
 
Advice to DoctorProduct contains 200ppm of a quaternary ammonium salt. Contact Poisons Information Centre.
 
Other InformationM
 

 5. FIRE FIGHTING MEASURES

 
Suitable Extinguishing MediaUse extinguishing media appropriate to surrounding fire. Use water spray to cool containers and surrounds.
 
Hazards from Combustion ProductsM
 
Specific HazardsNon flammable. Not an explosion hazard.
 
Precautions in connection with FireM
 
Unsuitable Extinguishing MediaM
 

 6. ACCIDENTAL RELEASE MEASURES

 
Emergency ProceduresM
 
Spills & DisposalDisposal of small spillages only. For large spillages liquids should be contained using sand or earth, and both liquids and solids then transferred to salvage containers. Residues should be treated as for small spillages. CAUTION: Before dealing with spillage take necessary protective measures, inform others to keep at a safe distance and, for flammable materials, shut off all possible sources of ignition. CARE! Spillages will be slippery. If local regulations permit, mop up with plenty of water and run to waste, diluting greatly with running water. Otherwise absorb on inert absorbent, transfer to container and arrange removal by disposals company.
Wash site of spillage thoroughly with water. Ventilate area to dispel any residual vapours.
 

 7. HANDLING AND STORAGE

 
Precautions for Safe HandlingM
 
Conditions for Safe StorageStore in a cool, well ventilated place, out of reach of children. Large quantities should be stored in a bunded area. Store in original container. Keep away from acids and oxidising agents. Prevent vapours from collecting in low lying or enclosed spaces. Protect from physical damage. Clean up all spills and splashes promptly; avoid secondary accidents.
 
Storage RegulationsM
 

 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

 
Biological Limit ValuesM
 
Other Exposure InformationNo value assigned by the National Occupational Health and Safety Commission (SafeWork Australia).
 
Engineering ControlsMaintain adequate ventilation at all times. In most circumstances natural ventilation systems are adequate unless the material is heated, reacted or otherwise changed in some type of chemical reaction, then the use of a local exhaust ventilation system is recommended.
 
Respiratory ProtectionM
 
Eye ProtectionM
 
Hand ProtectionM
 
Personal Protective EquipmentAvoid contact with the skin and eyes. Personal protection to be selected from those recommended below, as appropriate to mode of use, quantity handled and degree of hazard:-
Safety glasses where risk of splashing exists;
Gloves, rubber or plastic where risk of skin contact exists.
Always maintain a high level of personal hygiene when using this product. That is wash hands before eating, drinking, smoking or using the toilet.
 

 9. PHYSICAL AND CHEMICAL PROPERTIES

 
FormLiquid
 
AppearancePale pink liquid.
 
OdourDistinct 'quat' odour.
 
Decomposition TemperatureM
 
Melting PointM
 
Boiling Point100C
 
Solubility in WaterMiscible at all concentrations
 
Specific Gravity1.0
 
pH Value7.0 - 7.5
 
Vapour PressureNo data
 
Evaporation RateM
 
Odour ThresholdM
 
ViscosityM
 
Octanol/Water Partition CoefficientM
 
DensityM
 
Flash PointNone
 
FlammabilityNon flammable.
 
Auto-Ignition TemperatureM
 
Flammable Limits - LowerM
 
Flammable Limits - UpperM
 
Kinematic ViscosityM
 
Dynamic ViscosityM
 
Explosion Limit - UpperM
 
Explosion Limit - LowerM
 

 10. STABILITY AND REACTIVITY

 
Chemical StabilityStable under normal use conditons.
 
Conditions to AvoidHeat, flames, ignition sources and incompatibles.
 
Incompatible MaterialsStrong alkalis, acids, oxidizing agents.
 
Hazardous Decomposition ProductsWater vapour, carbon dioxide, oxides of nitrogen, trace of hydrogen chloride.
 
Hazardous ReactionsM
 
Hazardous PolymerizationM
 

 11. TOXICOLOGICAL INFORMATION

 
Toxicology InformationNo toxicity information is available for this product.
 
InhalationAn unlikely route owing to the low volatility of major ingredients. Aspiration into the lungs during swallowing or vomiting may lead to chemical pneumonitis.
When atomised in a confined space: May cause irritation to the nose, throat and respiratory system with effects including: Dizziness, headache and loss of co-ordination.
 
IngestionMay cause irritation to mouth, throat and stomach with effects including mucous build up, irritation to the tongue and lips and pains in the stomach, which may lead to nausea, vomiting and diarrhoea.
 
SkinMay cause irritation to the skin, with effects including; Redness and itchiness.
 
EyeMay cause irritation to the eyes, with effects including: tearing, pain, stinging and blurred vision.
 
Chronic EffectsChronic effects are unlikely to occur.
 
Acute Toxicity - OralLD50: Dialkyl dimethylammonium chloride 366 mg/kg oral, rat
 

 12. ECOLOGICAL INFORMATION

 
EcotoxicityMaybe harmful to aquatic organisms.
 
Persistence / DegradabilityBiodegradable
 
MobilityDilutes readily in water
 
Environment ProtectionAvoid contaminating waterways, drains, sewers, or ground.
 

 13. DISPOSAL CONSIDERATIONS

 
Disposal ConsiderationsM
 
Waste DisposalRefer to Land Waste Management Authority in your State.
 

 14. TRANSPORT INFORMATION

 
Transport InformationNot classified as a Dangerous Good according to the Australian Code for the Transport of Dangerous Goods by Road and Rail.
 
IMDG Marine Pollutant (MP)M
 

 15. REGULATORY INFORMATION

 
Regulatory InformationNON-HAZARDOUS SUBSTANCE.
NOT SCHEDULED POISON.

Not Classified as Hazardous according to criteria of National Occupational Health & Safety Commission, Australia (NOHSC).
Not classified as a Scheduled Poison according to the Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP).
 
Poisons ScheduleNot Scheduled
 
AICS (Australia)All components listed.
 

 16. OTHER INFORMATION

 
Date of preparation or last revision of MSDS10/02/2021
 
Literature ReferencesPreparation of Safety Data Sheets for hazardous Chemicals Code of Practice
Standard for the Uniform Scheduling of Medicines and Poisons
Australian Code for the Transport of Dangerous Goods by Road & Rail
Globally Harmonised System of classification and labelling of chemicals
 
Signature of Preparer/Data ServiceTechnical manager Tel: (03) 9450 4555
 
Technical Contact NumbersEmergency Advice All Hours:
Chief Chemist Tel: (03) 9450 4555 Mon-Fri 8am - 6pm
Poisons Information Centre: 13 11 26 - 24hrs
 
Other InformationThis SDS summarises at the date of issue our best knowledge of the
health and safety hazard information of the product, and in particular how
to safely handle and use the product in the Workplace. Please refer to the
technical datasheet (Instructions for use), and the label on the drum. The
company cannot anticipate or control the individual working conditions
encountered and so each user should read this SDS carefully, and if in
doubt ring the Contact Point Number given below.
 

 End of MSDS

 

(C) Copyright Chemical Safety International Pty Ltd
Copyright in the source code of the HTML, PDF, XML, XFO and any other electronic files rendered by an Infosafe system for Infosafe MSDS displayed is the intellectual property of Chemical Safety International Pty Ltd.
Copyright in the layout, presentation and appearance of each Infosafe MSDS displayed is the intellectual property of Chemical Safety International Pty Ltd.
The compilation of MSDS's displayed is the intellectual property of Chemical Safety International Pty Ltd.
Copying of any MSDS displayed is permitted for personal use only and otherwise is not permitted. In particular the MSDS's displayed cannot be copied for the purpose of sale or licence or for inclusion as part of a collection of MSDS without the express written consent of Chemical Safety International Pty Ltd.
Print Date: 11/05/2021 BS: 1.17.117