Mail Attachment Print label
print 
 



Material Safety Data Sheet


LPA LAUNDRY POWDER
Infosafe™ No.VARB5Issue DateFebruary 2017StatusISSUED by MILESTONBS: 1.17.117

Classified as hazardous according to criteria of NOHSC


 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER

 
Product NameLPA LAUNDRY POWDER
 
Company NameMilestone Chemicals Pty. Ltd. (ABN 85115166357)
 
Address115 Northern Road West Heidelberg
VIC 3081
 
Emergency Tel.(03) 9450 4555 Mon-Fri 8am - 6pm
 
Telephone/Fax NumberTel: (03) 9450 4555
Fax: (03) 9457 5518
 
Recommended UseHeavy duty all purpose laundry detergent for industrial applications.
 
Other NamesNot Available
 

 2. HAZARDS IDENTIFICATION

 
Hazard ClassificationSkin Corrosion/Irritation: Category 1B
 
Risk Phrase(s)R34 Causes burns.
 
Safety Phrase(s)S1/2 Keep locked up and out of reach of children.
S13 Keep away from food, drink and animal feeding stuffs.
S22 Do not breathe dust.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S45 In case of accident or if you feel unwell seek medical advice immediately
S24/25 Avoid contact with skin and eyes.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
 

 3. COMPOSITION/INFORMATION ON INGREDIENTS

 
Chemical CharacterizationSolid
 
Ingredients    Name CAS Proportion Hazard Statement(s)
   
   Disodium metasilicate6834-92-030-60 %
   Other ingredients determined not to be hazardousNot requiredto 100%
 

 4. FIRST AID MEASURES

 
First Aid MeasuresM
 
InhalationRemove from exposure.
 
IngestionIf swallowed, do NOT induce vomiting. Give a glass of water to be taken slowly. If irritation develops or persists transport to hospital or doctor.
 
SkinIf skin contact occurs, remove contaminated clothing and wash skin thoroughly. Wash clothing before re-use. If irritation develops or persists transport to hospital or doctor.
 
EyeIf in eyes, hold eyes upen, flood with water for at least 15 minutes and see a doctor. If irritation develops or persists transport to hospital or doctor.
 
First Aid FacilitiesRecommended: Eye wash and normal wash room facilities.
 
Advice to DoctorProduct contains alkaline salts and surfactants. Vomiting has not bee induced because of risk of aspiration into the lungs. Contact Poisons Information Centre.
 
Other InformationM
 

 5. FIRE FIGHTING MEASURES

 
Suitable Extinguishing MediaWater, or as for other chemicals present.
 
Hazards from Combustion ProductsWater vapour, carbon dioxide, obnoxious fumes.
 
Specific MethodsIn case of small fire/explosion use water. In case of major emergency use PPE: breathing apparatus and protective gloves.
 
Specific HazardsNot a fire hazard. May react vigorously with acids, generating carbon dioxide, a simple asphyxiant. If tanks, drums or containers of this material are heated, they may rupture and project corrosive materials over a wide area.
 
Hazchem Code2X
 
Precautions in connection with FireM
 
Unsuitable Extinguishing MediaM
 

 6. ACCIDENTAL RELEASE MEASURES

 
Emergency ProceduresKeep unnecessary people away; Isolate hazard area and deny entry. Stay upwind; Keep out of low areas. Do not walk or touch spilt material unless wearing personal protection as outlined under MSDS.
 
Spills & DisposalAvoid generating dusts. Wear suitable protective equipment. Ventilate area. If possible wet area down to prevent high dust levels. If available, use dustless methods, such as a HEPA vacuum and filter. Otherwise, use a non-sparking shovel and place into a suitably labeled container for later disposal. Do not dry sweep.
 

 7. HANDLING AND STORAGE

 
Precautions for Safe HandlingM
 
Conditions for Safe StorageStore in a dry, well ventilated place, out of reach of children. Store in original container. Keep container closed. Keep away from acids. Keep away from oxidising agents. Protect from physical damage. Clean up all spills promptly; avoid secondary accidents.
 
Storage RegulationsM
 

 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

 
Biological Limit ValuesM
 
Engineering ControlsConsider local mechanical exhaust/extraction if dust risk exists.
Where dust cannot be controlled in this way, personal respiratory protection should be employed.
 
Respiratory ProtectionM
 
Eye ProtectionM
 
Hand ProtectionM
 
Personal Protective EquipmentAvoid contact with the skin and eyes. Avoid breathing the dust. Personal protection to be selected from those recommended below, as appropriate to mode of use, quantity handled and degree of hazard:-
Face shield or safety glasses
Gloves, rubber or plastic
Overalls.
Dust mask or half-face respirator with a P1 filter is recommended. All respirators must comply with AS/NZS 1715 and AS/NZS 1716.
Always maintain a high level of personal hygiene when using cleaning chemicals. That is wash hands before eating, drinking, smoking or using the toilet.
 

 9. PHYSICAL AND CHEMICAL PROPERTIES

 
FormSolid
 
AppearanceWhite free flowing powder
 
OdourLemon
 
Decomposition TemperatureM
 
Melting PointNo data.
 
Boiling PointM
 
Solubility in Water50 g/L approx.
 
Specific Gravity2.1 (bulk density)
 
pH Value12.0-13.0 (1% solution)
 
Vapour PressureNone
 
Evaporation RateM
 
Odour ThresholdM
 
ViscosityM
 
Octanol/Water Partition CoefficientM
 
DensityM
 
Flash PointNone.
 
FlammabilityNot flammable.
 
Auto-Ignition TemperatureM
 
Flammable Limits - LowerM
 
Flammable Limits - UpperM
 
Kinematic ViscosityM
 
Dynamic ViscosityM
 
Explosion Limit - UpperM
 
Explosion Limit - LowerM
 
Other InformationAlkaline mixture. Will react vigorously with acids, generating carbon dioxide, a simple asphyxiant. May become sticky in moist air.
 

 10. STABILITY AND REACTIVITY

 
Chemical StabilityStable under normal use conditons.
 
Conditions to AvoidHeat, flames, ignition sources and incompatibles.
 
Incompatible MaterialsStrong acids, oxidizing agents.
 
Hazardous Decomposition ProductsEmits choking and corrosive fumes when heated to decomposition.
 
Hazardous ReactionsM
 
Hazardous PolymerizationM
 

 11. TOXICOLOGICAL INFORMATION

 
Toxicology InformationNo adverse health effects are expected, if the product is handled in accordance with this Material Safety Data Sheet and the product label. Symptoms and effects that may arise if the product is mishandled and overexposure occurs are:
 
InhalationWill cause severe irritation to the nose, throat and respiratory system with effects including: Dizziness, headache, coughing, loss of co-ordination, chest pains, respiratory paralysis and or failure.
 
IngestionMay cause irritation to mouth, throat and stomach with effects including mucous build up, irritation to the tongue and lips and pains in the stomach, which may lead to nausea, vomiting and diarrhoea.
 
SkinWill cause burns to the skin, with effects including; Redness, blistering, localised pain and dermatitis.
 
EyeWill cause burns to the eyes with effects including: Pain, tearing, conjunctivitis and if duration of exposure is long enough, blindness will occur.
 
Chronic EffectsRepeated skin contact with the solid may lead to dermatitic effects and/or to necrosis (death) of the skin.
 
Acute Toxicity - OralLD 50 : Alkaline salts 1,100 - 7,400 mg/kg oral, rat
 
Acute Toxicity - InhalationLC 50 : Alkaline salts 2,300 mg/m3/2 hrs, rat
 

 12. ECOLOGICAL INFORMATION

 
EcotoxicityIn large concentrations this product is detrimental to the aquatic environment.
 
Persistence / DegradabilityInherently biodegradable
 
MobilityPowder is easily contained, but material is reasonably soluble in large amounts of water.
 
Other Adverse EffectsThis substance may cause long term adverse effects in the aquatic environment.
 
Environment ProtectionAvoid contaminating waterways, drains, sewers, or ground.
 

 13. DISPOSAL CONSIDERATIONS

 
Disposal ConsiderationsM
 
Waste DisposalRefer to appropriate authority in your State. Dispose of material through a licensed waste contractor. Normally suitable for disposal by approved waste disposal agent.
 

 14. TRANSPORT INFORMATION

 
Transport InformationClassified as a Class 8 Dangerous Good. Dangerous Goods of Class 8 Corrosives are incompatible in a placard load with any of the following: - Class 1, Class 4.3, Class 5, Class 6, if the Class 6 dangerous goods are cyanides and the Class 8 dangerous goods are acids and Class 7. Store away from acids.
 
U.N. Number3262
 
Proper Shipping NameCORROSIVE SOLID, BASIC, INORGANIC, N.O.S.
 
DG Class8
 
Hazchem Code2X
 
Packing GroupIII
 
IERG Number37
 
IMDG Marine Pollutant (MP)M
 

 15. REGULATORY INFORMATION

 
Regulatory InformationHAZARDOUS SUBSTANCE.
SCHEDULED POISON.

Classified as Hazardous according to criteria of National Occupational Health & Safety Commission, Australia (NOHSC).
Classified as a Scheduled Poison according to the Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP).
 
Poisons ScheduleS5
 
Hazard CategoryCorrosive
 
AICS (Australia)All components listed.
 

 16. OTHER INFORMATION

 
Date of preparation or last revision of MSDS12/02/2017
 
Literature ReferencesPreparation of Safety Data Sheets for hazardous Chemicals Code of Practice
Standard for the Uniform Scheduling of Medicines and Poisons
Australian Code for the Transport of Dangerous Goods by Road & Rail
Globally Harmonised System of classification and labelling of chemicals
 
Signature of Preparer/Data ServiceTechnical manager Tel: (03) 9450 4555
 
Technical Contact NumbersEmergency Advice All Hours:
Chief Chemist Tel: (03) 9450 4555 Mon-Fri 8am - 6pm
Poisons Information Centre: 13 11 26 - 24hrs
 
Other InformationThis SDS summarises at the date of issue our best knowledge of the
health and safety hazard information of the product, and in particular how
to safely handle and use the product in the Workplace. Please refer to the
technical datasheet (Instructions for use), and the label on the drum. The
company cannot anticipate or control the individual working conditions
encountered and so each user should read this SDS carefully, and if in
doubt ring the Contact Point Number given below.
 

 End of MSDS

 

(C) Copyright Chemical Safety International Pty Ltd
Copyright in the source code of the HTML, PDF, XML, XFO and any other electronic files rendered by an Infosafe system for Infosafe MSDS displayed is the intellectual property of Chemical Safety International Pty Ltd.
Copyright in the layout, presentation and appearance of each Infosafe MSDS displayed is the intellectual property of Chemical Safety International Pty Ltd.
The compilation of MSDS's displayed is the intellectual property of Chemical Safety International Pty Ltd.
Copying of any MSDS displayed is permitted for personal use only and otherwise is not permitted. In particular the MSDS's displayed cannot be copied for the purpose of sale or licence or for inclusion as part of a collection of MSDS without the express written consent of Chemical Safety International Pty Ltd.
Print Date: 11/05/2021 BS: 1.17.117